Lathem LX100, Руководство пользователя

Страница: 2 / 32

Lathem Security Solutions
Page 2
IMPORTANT!
•
Disassembling the LX100 in any way will void the warranty.
•
The LX100 is designed for interior use only.
•
The LX100 is not recommended for building exit doors.
•
The LX100 is not reversible from Right to Left hand or vice-versa.
Make sure you have the correct model for your door.
•
There are 2 backup keys included for emergency purposes. Lathem
does not manufacture or stock extra keys. Store them appropriately.
•
Make sure your door is between 1 3/8” – 2” thick.
•
Lock requires 4 AA (1.5 volt) alkaline batteries not included.
THIS EQUIPMENT COMPLIES WITH FCC CLASS-A REQUIREMENTS
PURSUANT SUBPART J OF PART-15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
WARNING: Changes or modifications to this product not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a business installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
This Class A digital apparatus complies with Canadian ICES-003.