manualshive.com logo in svg

Lastec ARTICULATOR XF100 Series, Руководство оператора

Поделиться
Скачать
Lastec ARTICULATOR XF100 Series Скачать руководство пользователя страница 5

To The Owner

Read This Manual BEFORE Operating The Articulator

To The Owner

12/9/20

1-1

1

SECTION 1   TO THE OWNER

1.1

Read This Manual BEFORE Operating The Articulator

Do not allow anyone to operate the Articulator without first read-
ing and understanding this operator’s manual in its entirety. Do 
not allow children to operate the Articulator. Do not operate the 
Articulator when children are present.

This information prepares you to operate the Articulator in a 
safe and knowledgeable manner. Proper operation of the Articu-
lator will provide a safer working environment, and promote 
higher quality, more efficient results.

The purpose of this manual is to assist you in properly and safely operating and maintain-
ing the deck. Read and understand this entire manual before attempting to set-up, oper-
ate, adjust, perform any maintenance on, or store the deck. 

Keep this manual at hand at all times for ready reference.

1.2

Product Registration

Immediately record the model and serial numbers of your Articulator in the spaces pro-
vided below.

Model Number: 

________________________

Serial Number:

 ______________________________

These numbers can be found on the serial number plate which is permanently affixed to 
the mower.

You should now fill out the warranty registration form online at 

www.lastec.com

 or 

located in the back of this section. This form must be completed and returned to the fac-
tory within fifteen (15) days of purchase in order to validate the warranty. Please do not 
hesitate!

1.3

Warranty Registration

Complete the following Lastec Warranty Registration Form and return to Lastec within 15 
days of the purchase of the Articulator. This will aid you, Lastec, and Lastec distributor in 
warranting and servicing of your Articulator.

Содержание ARTICULATOR XF100 Series












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды