manualshive.com logo in svg

Lastec ARTICULATOR XF100 Series, Руководство оператора

Поделиться
Скачать
Lastec ARTICULATOR XF100 Series Скачать руководство пользователя страница 12

Pre-operational Safety Rules

2-3

12/9/20

2

dependent upon the awareness and proper training of all personnel involved in the opera-
tion, transportation, maintenance, and storage of the deck.

 

The best safety device is an informed, careful operator. 

We ask you to be that kind of operator.

2.4

Pre-operational Safety Rules

Do not

 

allow children on or near the deck.

Do not

 

operate the deck when children are present.

Clear area of all personnel before operating the deck.

Do not allow anyone to operate the deck without proper instruction.

Know how to stop the deck quickly in an emergency. .

2.5

Personal Protection Equipment

Wear eye and hearing protection. 

Wear close-fitting clothing to avoid entangle-
ment in moving parts. 

Do not operate the deck or related equipment 
in bare feet, sandals, or sneakers: wear sturdy 
rough-soled work shoes.

Clear the cut area of stones, branches, balls or 
other debris that may be thrown. 

2.6

Operational Safety Rules

Stay clear of blades during operation.

Stay clear of all moving parts.

Содержание ARTICULATOR XF100 Series












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды