Important Note:
Intentional or unintentional changes or modifications must not be made unless under the express
consent of the party responsible for compliance. Any such modifications could void the user’s
authority to operate the equipment and will void the manufacturer’s warranty.
Last Mile Gear
P. O. Box 887
1324 Vandercook Way
Longview, WA. 98632
www.lastmilegear.com
GETTING STARTED
WELCOME
Thank you for your purchase of a Cyclone access point. This new technology is the latest
innovation in high speed wireless networking. Some of the Cyclone Plus system features are:
•
Network speeds of 10/100 BaseT
•
Small compact design
•
No special set up on your PC.
INTENDED USE
This manual is intended to be used with Cyclone software release version 4.x or greater. The
intended audience for this manual is system operators and equipment installers.
WARRANTY
Last Mile Gear offers a warranty covering a period of 1 year from the date of purchase by the
customer. If a product is found defective during the warranty period, Last Mile Gear will repair or
replace the product with the same or a similar model, which may be a reconditioned unit, without
charge for parts or labor.
IN NO EVENT SHALL LAST MILE GEAR BE LIABLE TO YOU OR ANY OTHER PARTY FOR
ANY DIRECT, INDIRECT, GENERAL, SPECIAL, INCIDENTAL, CONSEQUENTIAL,
EXEMPLARY OR OTHER DAMAGE ARISING OUT OF THE USE OR INABILITY TO USE THE
PRODUCT (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR ANY OTHER
PECUNIARY LOSS, OR FROM ANY BREACH OF WARRANTY, EVEN IF LAST MILE GEAR
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. (Some states do not allow
the exclusion or limitation of incidental or consequential damages, so the above exclusion or
limitation may not apply to you.) IN NO CASE SHALL LAST MILE GEAR LIABILITY EXCEED
THE AMOUNT YOU PAID FOR THE PRODUCT.
BACKGROUND INFORMATION ON NETWORKING
Computers are assigned IP addresses by network operators, which have two methods available,
static or dynamic IP addressing. The user of this document will need to understand how IP
addressing is done at their particular location.
All Cyclone radio products (Access Point Modules, and Backhaul Modules)
have the default IP address of 169.254.1.1. For a computer to talk to Cyclone, as it comes from
the factory, either of the following conditions must be met:
•
If the computer is
not
configured for DHCP, then it has to have a static IP address on the
169.254 network (i.e. 169.254.1.5)
•
If the computer is configured for DHCP, then it will automatically obtain an IP address on
•
the 169.254 network after minute or two as long as it is not connected to the network.
