To remove the Table Assembly...
Rotate the Press Handle to its full upright position so that the Chrome Knob is disengaged from
the Rack Support Plate.
Using a 5/8” Wrench (not provided) loosen, but do not remove the 7/16”-20 x 1” Hex Head Table
Mount Bolt.
Remove the Table Assembly from the Wooden Base.
Attach the new Table Assembly making sure the notch on the Bottom Plate fits into
the 7/16”-20 x 1” Hex Head Table Mount Bolt. Make sure the 7/16” Flat Washer
is on the topside of the Bottom Plate.
Tighten down the 7/16”-20 x 1” Hex Head Table Mount Bolt and pull down
on the Press Handle to engage the Rack Support Plate. Make sure
the Rack Support Plate is coming straight down onto the
Chrome Knob. Adjust the Table Assembly as needed
to obtain proper alignment with the Rack Support
Plate.
When your machine is shipped, two Shipping Tabs are
placed under the Table Assembly to help prevent
movement and shipping damage. These tabs have no
further function and can be removed if necessary.
Operating Instructions
Page 05
Note:
1.
2.
3.
4.
5.
Changing The Table Assembly
Rack Support Plate
Shipping Tabs
Press
Handle
Chrome Knob
Bottom Plate
7/16”-20 x 1” Hex Head
Table Mount Bolt
7/16” Flat Washer
Table Assembly
