Lasonic MSU-2020, Руководство пользователя

Страница: 17 / 24

Setting the alarm
Setting the alarm
There are two independent alarms in this unit. (Alarm1
and Alarm 2) When you want to use the alarm function,
you should set the content of the alarm.
1) Press and hold the alarm button on the front panel or
the remote control, the unit will enter to alarm setting
Fig 19
session. (See Fig. 19) In alarm setting session, you
can set:
wakeup time adjustment
wakeup source selection
wakeup volume adjustment
2) Wakeup time adjustment
Fig 20
In alarm adjustment session, you can adjust the
wakeup time by pressing the time + button and
time - button on the front panel or pressing the
PREV and NEXT button on the remote control.
(See Fig. 20)
Fig 21
3) Wakeup source selection
You can select the wakeup source as follow:
Radio (FM1, FM2 and AM)
CD or USB(SD/MMC)
Press the BAND button to choose radio band then
press the PRESET button 1-8 to choose alarm
source station. Press the SOURCE button to choose
CD or USB as alarm source. (See Fig. 21)
Note
: When you use the radio as wakeup source
, store radio station you wish to use in a preset
location. When you use the CD as the wakeup
source, place a disc in the CD slot. When you
use the USB as the wakeup source, insert USB
Fig 22
device or SD/MMC card into the slot.
4) Wakeup volume adjustment
In alarm adjustment session, you can adjust the
wakeup volume by tuning volume knob on the
front panel or pressing the volume ,-)
on the remote control. (See Fig. 22)
5) By pressing the alarm button again to end the
alarm adjustment session, the unit will store
your alarm new settings. (See Fig. 19)
16