- 2 -
1. OPERATING CONDITIONS
- Before installing and using the video door phone, read the assembly and operating
manual.
- Electrical installation should be made in accordance with PN-IEC 60364-1 standard
by an authorized person.
- Electrical installation should be made in such a way as to prevent exposure to direct
lightning discharge.
- Video door phone elements should be used as intended. Using video door phone
elements for other purposes, including with equipment other than specified in the
manual or connecting them in other manner than prescribed by the manufacturer may
lead to their damage, fire or electric shock.
- Do not cover the openings in the monitor housings.
- Do not insert any metal items in the openings in the monitor housing and the feeder
as it may lead to electric shock or fire.
- The external panel should be installed in a place with low noise level.
- The external panel is powered with video door phone voltage. +Vcc and GND clamps
on the external panel should not be connected to an external feeder.
- Video door phone elements should be connected to an electrical installation when the
feeder is disconnected from the power network.
!
NOTE!
For affirmation of safety put on the mains terminal
covering (plastic element attached to the feeder)
after connect the feeder to the mains.
Covering installation method is shown on
drawing. All the connection make with
the power supply turn off.
2. PURPOSE AND CHARACTERISTICS OF VIDEO DOOR PHONE
- Video door phone is designed for single family houses, companies, institutions and
service providers.
- Two monitors may be connected to the external panel.
- Monitor featured with TFT colour display is used in the video door phone. It is a hands
free duplex monitor (two-way voice communication without manual control of call
direction).
- The external panel is wall-mounted.
- The panel is equipped with a colour camera and a LED display facilitating viewing
visitors faces at night.
