- 10 -
are heard at this point then the location has a code stored, you may proceed as this
is only a warning.
4)enter the desired 4 digit user code, if the code lock retunes immediately to the
programmiong mode base level then the code is not permitted as it already exits else
where in another locations, if the code is permitted then you will hear 3 short sounds
5)return to step 2 to enter more user codes or press the * key to exit programming
mode.
ATTENTION!
In default configuration is not programmed any user code.
DELETING USER CODES
1)press *, you will hear 2 short sounds
2)enter your 4 digit administrator code, you will hear 3 short sounds, red LED is flashing
you are now in programming mode
3)enter user location (01-40), you will hear 3 short sounds
4)press button #, you will hear 3 short sounds
5)return to step 3 to delete more codes or press the * key to exit programming mode.
SETTING THE LOCK TIME
1)press *, you will hear 2 short sounds
2)enter your 4 digit administrator code, you will hear 3 short sounds, red LED is flashing
you are now in programming mode
3)enter 00, you will hear 2 short sounds
4)enter the desired lock/relay operation time in a two digit format (01 to 99 second),
you will hear 3 short sounds.
5)press the * key to exit programming mode.
ATTENTION!
Default lock time is set to 05 second.
CHANGING THE ADMINISTRATOR CODE
1)remove power from the unit and press and hold down the * key
2)apply power whilst holding button down, the unit will then give long continuous sound.
3)when the tone has stoped, release the * key and enter your new 4 digit administrator
code
Avoid letting the video door phone elements contact with water or detergents during
cleaning as it may lead to the damage of video door phone or electric shock!
8.PROGRAMMING MODE IN PANEL BVC-6503
Entering programming mode
1) press *, you will hear 2 short sounds
2)enter your 4 digit administrator code, you will hear 3 short sounds, red LED is flashing
you are now in programming mode
3) to exit programming mode press the * key.
Adding user codes
1)press *, you will hear 2 short sounds
2)enter your 4 digit administrator code, you will hear 3 short sounds, red LED is flashing
you are now in programming mode
3)enter the location 01 to 40 (31-40 are the latching code locations). If a series of bleeps
Содержание Bastion Apus
Страница 1: ...Video door phone set manual Bastion Apus...
