Rev. A 1/18
2
2084890
Rev. A 1/18
7
2084890
MODELO B20573
FUNCIONAMIENTO
(Figura 2)
1. Cuidadosamente retire el Ventilador de la la caja e instala pies como instruido arriba.
2. Coloque el ventilador sobre una superficie firme y nivelada.
3. Asegúrese de que el Ventilador esté apagado (0).
4. Conecte el cable eléctrico a un tomacorriente de 120 voltios.
5. Poner el Termostato en el punto más alto (a la derecho).
6. Poner el Ventilador a la velocidad deseada: Alta (3), Media (2) o Baja(1).
7. La función del termostato percibe la temperatura ambiente y enciende o apaga el Ventilador AUTOMÁTICAMENTE a medida que cambia
la temperatura. Cuando la habitación está a una temperatura agradable, gire la perilla del termostato hasta que el Ventilador se detenga.
Ahora su Ventilador se Encenderá y Apagará en esta temperatura. Como una función agregada de seguridad, la Luz del Termostato indica
que su Ventilador está configurado y puede Encenderse en cualquier momento.
8. Después de apagar el Ventilador, desconecte la unidad del tomacorriente eléctrico.
ADVERTENCIA:
Los tacos de plástico o hule, tales como las patas de esta unidad, pueden pegarse a la superficie de los muebles.
La unidad podría dejar un residuo capaz de oscurecer, manchar o dejar marcas permanentes en el acabado de ciertas superficies de
muebles, incluyendo superficies y pisos de madera.
INSTRUCCIONES DE VENTANA
(Figura 3)
Este ventilador está destinado para ser usado en una ventana con dimensiones mínimas de 22 pulgadas (55,8 cm) de ancho por 22
pulgadas (55,8 cm) de alto, con un alféizar de 5 pulgadas (12,7 cm) de profundidad.
El ventilador debe estar conectado directamente en un tomacorriente interno.
El marco de la ventana puede estar más debajo del resto en la parte superior del cuerpo del ventilador para ayudar a fijar el ventilador
en la ventana. El marco no debe reposar sobre la manilla o perilla y debe estar al ras con el cuerpo del ventilador.
Se deben instalar las patas suministradas con el ventilador.
Ventilador de torre oscilante con rejillas dobles
PARTE POSTERIOR DEL VENTILADOR
PRECAUCION: COLOQUE LAS PATAS ANTES DE HACERLO FUNCIONAR
No lo haga funcionar sin las patas puestas
1. Separe las dos Patas de Plástico, tal como se muestra figura 1.
2. Deslice las Patas dentro de las Ranuras en el fondo del Ventilador hasta que estén en su posición
Figura 1
Figura 2
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
When using electrical appliances, basic precautions should always be followed to reduce
the risk of fire, electrical shock and injury to persons, including the following:
Read all instructions before using this Fan.
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, ALWAYS
FOLLOW THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:
DO NOT
use this fan to ventilate areas where flammable liquids or vapors are used, stored or are present, including paints,
gasoline, varnishes, floor refinishing products or solvents. ALWAYS read and follow all warnings and instructions on the
containers for these products!
ALWAYS
be sure the plug fits tightly into the outlet. When plugs fit loosely into outlets, they may slip partially out of the
outlet and create a poor connection. This may cause outlets to overheat and create a potential fire hazard. Outlets in this
condition should be replaced by a qualified electrician.
ALWAYS
unplug the power cord when servicing, cleaning or moving the Fan. DO NOT use the ON/OFF switch as the sole
means of disconnecting power. NEVER leave children unattended when the Fan is on or plugged in. ALWAYS turn off and
unplug the Fan when not in use.
BE CERTAIN
that the power source for the Fan is 120V AC. DO NOT plug the Fan into 240V or other power source.
The
Blue Plug™
on your Lasko fan is a safety feature. It contains a non-replaceable safety device (fuse) that should not be
removed or tampered with. To reduce the risk of fire, electric shock and personal injury,
DO NOT
attempt to remove, replace,
repair or tamper with the originally supplied plug. If the Fan has stopped functioning, it may be due to the safety device
incorporated in this plug.
THIS FAN HAS A POLARIZED PLUG
(one blade is wider than the other). This plug is designed to fit into the outlet only one
way. Match the wide blade to wide slot in outlet and FULLY INSERT. DO NOT attempt to bypass or defeat this safety fea-
ture. If the plug does not fit in the outlet, consult a qualified electrician. The outlet may need to be replaced.
•
AVOID
the use of extension cords, power strips, power taps, outlet style air fresheners or other cord connected device, as these
devices may overheat and cause a fire hazard.
•
DO NOT
route power cord under rugs, carpets, runners or furniture. This may damage the cord or cause it to overheat creating a fire
hazard.
•
ALWAYS
place the Fan on a stable, flat, level surface while in operation to prevent the Fan from overturning.
•
NEVER
insert or allow fingers or objects to enter grill openings while Fan is in operation or injury and/or damage to the Fan may occur.
•
DO NOT
block, cover or obstruct air flow to or from the fan while in operation.
•
DO NOT
use this Fan outdoors or near water or wet locations such as a bath tub, pool or hot tub. Use of this Fan in a wet location
may create a shock hazard.
•
DO NOT
run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture
or appliances. Arrange cord away from traffic area and where it will not be tripped over.
•
NEVER
use a single extension cord to operate more than one Fan or other electrical device.
•
DO NOT
use this Fan if it has been damaged or is not functioning properly.
•
THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008)
.This Fan is not suitable for use in agricultural
facilities including areas where livestock, poultry or other animals are confined. Please refer to National Electric Code (NEC) Article
547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for agricultural buildings.
•
THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008)
.This Fan is not suitable for use in hazardous
locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or standards relating to electrical
requirements for hazardous locations.
CAUTION
Figura 3
Cable
Eléctrico
IMPORTANTE:
Su Ventilador Weather-Shield
®
LASKO está equipado con Termostato de Control de Clima. Este Termostato funciona
detectando la temperatura de la habitación y encenderá o apagará el Ventilador AUTOMÁTICAMENTE a medida que cambie la temperatura.