Laski LS 150 T, Руководство по эксплуатации

Страница: 10 / 48

10
- While working the chipper should rest on the ground.
- Keep this machine beyond children's and unauthorised person's reach. Avoid
their attendance while chipping.
- When using the chipper without any container or closed bin, keep anybody
beyond the area where chips are being thrown.
- When using the chipper with such a bin, never look inside if the chipper is still
working.
- When leaving the machine take always the switch key out of ignition.
- Every operator of this machine is fully responsible for any injury or damage
caused to the third persons within the operating reach of the machine.
- At work in residential zones use the machine in accordance with regulations of
the local authorities to avoid disturbing of local inhabitants (noise, flying
chips).
- Warning !!! Be aware of ejected particles. They have substantial kinetic
energy. If the loaded wooden material contains not allowed parts, such as
metal, sand, glass etc., then such objects can reach a longer distance than
wooden chips. Direct the discharge duct to regulate its ejecting as needed.
- Instructions for use of the cardan shaft operation and the trailing tractor are an
integral part of this manual and should be always respected.
- While coupling the chipper to a tractor do not stand between its towing bar
and a tractor. Do not stand behind a towing tractor while backing. Ask other
person to help you with coupling.
- First it is necessary to couple the cardan shaft to the chipper input shaft, then
the lower linkage, the upper drawbar of the three-point hitch and finally the
tractor PTO shaft.