Laski FZ 500/27, Руководство по эксплуатации, Страница: 21 / 37

2 1
Coupling/uncoupling
-
The cutter should be coupled to a building machine with min. carrying capacity of 300 kg
in the whole range of its hydraulic jib.
- The cutter should be equipped with a bolted suspension joint. Its bolts must be tightened
properly. For attachment use steel fixing bolts with self-locking nuts.
- Couple the cutter to the building machine.
-
If the cutter is to be used immediately, lift it up slightly, loosen the locking bolt and
remove the supporting frame.
- Put the supporting frame aside for further use after the work.
- The cutter is not allowed to be lent on the ground or any other object. For putting the
cutter aside always use its supporting frame to avoid any contact with hard objects
(concrete, stones etc.).
-
For uncoupling proceed in reverse order.
WARNING!!! The cutter should be always in vertical position or with its slightly oblique
axis. It is not allowed to put the cutter aside in its horizontal position.