Manual: MicroNet Slim - Network Interface
page 8 / 24
DMX settings
3
0-192
Size of the laser projection X axis
193-255 Automatic size change of X axis with increasing speed
4
0-192
Size of the laser projection Y axis
193-255 Automatic size change of Y axis with increasing speed
5
0-192
Position of the laser projection X axis
193-255 Automatic position change of X axis with increasing speed
6
0-192
Position of the laser projection Y axis
193-255 Automatic position change of Y axis with increasing speed
7
0-192
Rotation of the laser projection
193-255 Automatic rotation with increasing speed
8
0-192
Blanking: selects how much of the laser pattern shall be blanked
193-255 Automatic blanking with increasing speed
9
0-192
Blankshift: selects which part of the laser projection shall be blanked (use only
in combination with channel 7 - blanking)
193-255 Automatic blankshift with increasing speed
10
0-15
Show pattern in original colors
16-31
Pattern completely red
32-47
Pattern completely green
48-63
Pattern completely blue
64-79
Pattern completely yellow
channel range
function
10
80-95
Pattern completely magenta
96-111
Pattern completely cyan
112-127 Pattern completely white
128-255 Rainbow effect
11
0-31
Default scan speed (200 points per second)
32-255
Manual selection of scanspeed (5000 - 30000 points per second)
Attention: make sure not to overload the scanners of the laser projector! If
you‘re unsure about the maximum scanspeed of your laser projector, stay with
the default setting.
