Manual: Laserworld Purelight Series
page 16 / 69
English
(1) DJ Mode
To get laser output, DMX channel 1 needs to have a value greater than 0 (recommended
64 to 192)
Channel
Mode
Value
Function
1 Intensity
DJ
0
Laser off
1 - 255
Increase intensity (full intensity = 255)
2 Pattern selection
DJ
0
Blackout (000.ild must not exist)
1 - 255
Display patterns from SD card:
1 = 001.ild
2 = 002.ild
... and so on
If no pattern is assigned to a number = blackout
3 Pattern speed
(Framerate)
DJ
0 - 15
Standard speed: 50 fps
16 - 255
Increasing speed from 0 fps to 100 fps
4 Size
DJ
0 - 127
Decreasing size X + Y-axis
128 - 191
Decreasing size X-axis
192 - 255
Decreasing size Y-axis
5 Automatic size
DJ
0 - 63
Full size
64 - 127
Changing size automatically X + Y-axis
(increasing speed)
128 - 191
Changing size automatically X-axis
(increasing speed)
192 - 255
Changing size automatically Y-axis
(increasing speed)
6 Rotate
DJ
0 - 192
Manual rotation
193 - 224
Automatic rotation anti-clockwise
(increasing speed)
225 - 255
Automatic rotation clockwise
(increasing speed)
7 Position X-axis coarse
DJ
0 - 255
0 = center
8 Position X-axis fine
DJ
0 - 255
9 Position Y-axis coarse
DJ
0 - 255
0 = center
10 Position Y-axis fine
DJ
0 - 255
11 Color effects
DJ
0 - 15
Show pattern in original colors
16 - 79
Show pattern in different colors (monochrome)
80 - 143
Re-color effects:
Original colors are replaced by new colors
144 - 255
Automatic change of re-color effects
(increasing speed)
