USER MANUAL: Laserworld Scanner Set LW-80k
Date: 07/2010
page
3
of
6
Speed
The scanning speeds were measured with Showeditor software, and a laboratory
power supply at +/24V. Galvos were fixed in the standard mount on a metal base
plate, without forced cooling. Mirrors were 6x11x0.7mm
Angle
Speed
~30°
~30,000 pps
~15°
~50,000 pps
~5°
~80,000 pps
Installation
The driver/scanner pairs are adjusted at the factory and marked X and Y
respectively, do not exchange.
The picture shows a basic setup
:
Connectors
Driver board:
The feedback signal
is for safety boards.
If not used, do not
connect.
C24V, -
24V, Gnd (2
connectors) to the
corresponding
signals on the
power supply.
