Laserworld Ecoline Series, Руководство пользователя

Страница: 5 / 17

8.2. Music mode, Sound-to-light operation
Your device runs in music mode:
Control the music-sensitivity with the trim pot at the front panel. The LED is flas-
hing when the device is triggered.
8.3. DMX-512 mode
Switch 10 must be set to „off“, the other switches are used for setting the DMX
address:
Connect a DMX controller to operate the laser.
Use the switches 1 - 9 to set the DMX address of the laser. Each switch represents a
number. To define a number use the preceding number and multiply it by 2:
Switch 1 2 3 4 5 6 7 8 9 10
Number 1 2 4 8 16 32 64 128 256 Mode Switch
The laser uses 12 DMX channels, so make sure that the next device uses an address
that doesn’t overlap with this range.
Channel Value Function
1 0 - 69 Laser off
70 - 139 Sound mode
140 - 209 Automatic mode
210 - 255 DMX mode
2 0 - 255 Pattern selection
3 0 - 255 Strobe effect
4 0 - 255 Point speed
5 0 - 255 x axis positioning
6 0 - 255 y axis positioning
Channel Value Function
7 0 - 255 Zoom / size
8 0- 255 Color
9 above 200 Reset
10 1 - 255 Rotate x axis
11 1 - 255 Rotate y axis
12 1 - 255 Rotate z axis
Please note that a pattern can not necessarily be combined with each effect.
8.4. Turn laser off
To turn off the device switch it off („OFF“), switch the key to „OFF“ and disconnect
the power cable from the mains.