USER MANUAL: Laserworld CS-400RGY
Date: 01/2008
Page 7 of 9
Please note that according to the pattern, not all effect channels are
activated.
E.g. you can’t zoom dynamic patterns, etc.
Channel 3 (strobe) is also available when in soundmode (channel 1 70-209).
6. ILDA OPERATION
Connect the laser to an ILDA output (as our USB-box) using the adaptor shipped
with the device, switches “BLANKING” and “X/Y” on the back of the laser have to be
down. You can now operate the laser with ILDA.
Use this switch setting only when connected to an ILDA
controller. Even if you disconnect/interrupt the IDLA connection
only for a short period, always put the switches into up position,
or turn the device off.
You can now control laser output with a PC, using for example our ShowEditor 2006
software. Laserworld offers a variety of music synchronous lasershows for
ShowEditor 2006.
