USER MANUAL: Laserworld CS-100G
Date: 01/2008
Page 5 of 11
Thank you for purchasing our CS-100G laser projector. In order to use this product
safely and throughtly. Please read over this manual carefully before any
operation,the operation must according to manual strictly to avoid any personal hurt
or products damage . Any problem exclude in this manual please contact us!.
Specification
Model Reference#
LP-209
Components
Laser projector×1
Power cable×1
DMX512 cable×1
Interlock 9pin plug×1
Laser key×2
Using voltage
AC 110V~230V
，
50/60Hz
Voltage of input signal
-10V ~ +10V
Control Mode
Auto/AUDIO/DMX/ILDA(optional)
DMX channel
12
Scanning system
20KPPS
Lasers&Power
Green laser : 532nm/ 75~100mW
Operating temperature
10
°
~
40°
Dimension(mm)
280(L)×200(W)×150(H)
Weight(kg)
3
Safety fuse
250V / F2A Φ5×20mm
ATTENTION&MAINTENANCE
1.
Do not disconnect the device without professional instruction
2.
Keep surrounding dry and clean.
this unit should be keep dry, do not use in the
rain or dank and dusty environment. Projector should be covered with water-
proof when operate at outside.
3.
Keep surrounding temperature at15~30 ,Remain 10minutes for equipment
cooling after 2 hours continuously work,or laser expected time will be
reduced.
4.
Distance between lasing aperture and projected item should not be less than 1
meter.
5.
Do not turn device on/off frequently to avoid broken.
6.
Do not look into the laser beam directly,or view laser beam directly with
optical instruments.
7.
Do not touch the device with wet hands.
8.
Turn off the power before installation and maintenance.
9.
When the laser diode became dim or broken, please contact the dealer timely.
10.
To use the original package when transport again and to avoid shake.
