5. Sail Numbers
1
. Identify the sail number of your LaserPerformance Bug by referring to the
builder’s serial number plate positioned on the starboard (right hand) side of
the rear sub deck inner tank side.
001234
Sail Number
2
. Cut the required sail numbers from the generic digital 8’s supplied using
the following guidance:
Cut on the dotted line to make the specifi ed number
3
. Apply the sail numbers in a dry, clean and wind free environment using the following guidance:
Standard Sail
1
. Lay the sail on a fl at surface starboard/right hand side up.
2
. Th
e numbers on the starboard/right hand side of a sail are always higher than that
of the port/left hand side.
3
. Mark a line 90 degrees to the leach at 50% of the total leach length. (Use tape)
4
. Measure 100 mm in from the leach on this line.
5
. Th
e left hand side of the fi rst number should be positioned 100 mm in from the
leach with the top of the number against the aforementioned tape line.
6
. Th
e numbers should be positioned 60 mm apart.
7
. Turn over the sail and position the port/left numbers 60 mm below the lower edge
and parallel to the starboard/right hand side numbers.
BUG -
40.90 ft ²/ 3.80 m ²
