DistanceMaster Compact Pro
13
Inserting batteries
(see Fig. A)
Open the battery compartment and insert batteries according
to the symbols. Be sure to pay attention to polarity.
Safety instructions
Dealing with RF radiation
– The measuring device is equipped with a wireless interface.
– The measuring device complies with electromagnetic compatibility
and wireless radiation regulations and limits in accordance with
the RED 2014/53/EU.
– Umarex GmbH & Co. KG hereby declares that the DistanceMaster
Compact Pro radio equipment complies with the essential
requirements and other provisions of the European Radio
Equipment Directive 2014/53/EU (RED). The EU Declaration
of Conformity can be found in its entirety at the following address:
http://laserliner.com/info?an=ACH
– Local operating restrictions – for example, in hospitals, aircraft,
petrol stations or in the vicinity of people with pacemakers – may apply.
Electronic devices can potentially cause hazards or interference or
be subject to hazards or interference.
– The measuring accuracy may be affected when working close to high
voltages or high electromagnetic alternating fields.
EN
4.658m
11.237m
52.342m
30.0°
b
h
i
g
f
k
l
j
d
c
a
e
DISPLAY:
a
Display length / area / volume /
Angle function 1 + 2 + 3
b
Bluetooth
®*
function
c
Malfunction / service required
d
Memory
e
Bluetooth
®*
function activated
f
Battery symbol
g
Measured value, angle function
h
Intermediate values /
min/max values
i
Measurement values /
Measurement results
Unit m / ft / inch / _‘ _“
j
min/max continuous
measurement
k
Measurement point (reference)
rear / front
l
The bar diagram shows how well
suited the reflection surface is for
measurement. This is particularly
useful for measuring over long
distances, dark surfaces or bright
ambient light.
