LaserLiner AquaPro Series, Руководство по эксплуатации

Страница: 15 / 36

Slope mode:
To lay out slopes, the tilt function must remain
shut off.
• Turn the transport lock (F) in the arrow's
"Lock” direction to its limit. Now the tilt
function is inactive and the unit cannot align
itself automatically.
• Press the On/Off button (A). The prism head
will begin to rotate.
• The speed of rotation can be changed with
the selector button (B), H = 600 RPM, M =
400 RPM, L = 200 RPM.
• Adjust the unit to the desired angle. Slope
angle can be set precisely and quickly with
the aid of the optional angle plate, Art. No.:
080.75. Its use is simplified in combination
with a crank tripod, e.g. Art. No.: 080.30.
AquaPro
ENGLISH 15
Important: Horizontal levelling cannot be accomplished in slope mode
because the unit cannot automatically level itself. Refer also to "Horizontal
use of AquaPro" about this.
Art-No:
080.75
Art-No:
080.30
Note: Always activate the tilt function for horizontal levelling.
This is active when the unit is switched on and the transport lock is turned
to its "Unlock”
position. If the unit is currently outside of its automatic
levelling range (> 3,5°) , a warning signal will sound and the prism head
will not rotate. The unit must then be placed on a surface which is closer
to level.
Z
Y
X
X- / Y- / Z-
Achsen
Note:
Regularly check the calibration before
use, after transport and after extended
periods of storage. Always make sure to
control all 3 axes.