05
1
Tab
2
HEPA13 filter
3
Filter cover
Changing the filter
1. A flashing Filter reset button indicates the filter is due for replacement.
2. Switch off the air purifier and disconnect from the mains.
3. Remove the filter cover (3) on the underside of the device by rotating the tab (1) to the left and removing
the filter cover.
4. Remove the old HEPA13 filter (2) from the device.
5. Remove packaging from the new HEPA13 filter.
6. Insert the new HEPA13 filter into the device.
7. Refit the filter cover onto the device and rotate the tab to the right until it can go no further to fix it in place.
8. Press the Filter reset button for 3 seconds until the symbols are all lit and are not flashing.
Technical data
(Subject to technical changes without notice. Rev22W28)
Dimensions (Height / diameter)
153 mm / Ø 175 mm
Weight
400 g
AirBreeze 120 Filter
EN
EU and UK directives and disposal
This product complies with all necessary standards for the free movement of goods
within the EU - and the UK.
The packaging for this product must be recycled in an environmentally appropriate
manner in accordance with European and UK guidelines for packaging in order to
recover valuable raw materials. The filter elements can usually be disposed of with
household or commercial waste at the end of their service life.
Further safety and supplementary notices at:
https://laserliner.com
