LaserLine QUAD 1000HDD, Руководство пользователя

Страница: 6 / 11

A) They can be used as a centering template for floor/deck
marking as described above. (4 template notches)
B) The targets are made of a translucent material allowing the
laser spot to be read from the opposite side that the laser spot is
impacting the target face.
C) The centering rings (bulls-eye target) make it easy to read the
target and center the laser spot
D) One target features a ¼ inch hole through the target center
that allows the center of the laser spot to pass through so that
more than one target can be used at the same time.
E) There are two mounting holes in each target to allow for
custom mounting at the job site.
500 ft. / 152m
0.80” / 2cm
1000 ft. / 305m
1.10” / 2.8cm
1500 ft. / 457m
1.40” / 3.6cm
WARNING:
Turn the laser OFF when centering up on the alignment target with an optical plummeted instrument. (Transferred points
from floor to floor) Viewing the laser spot through an optical plummet can increase the chance of eye hazard.
Approximate Beam Size at Distance (1:1 scale)
ALIGNMENT / TEMPLATE TARGETS
(2ea.)