23
PrecisionPlane-Laser 3D Pro
B
C
2.5 m
<
0
.7
5
m
m
=
O
K
EN
Technical data
(Subject to technical changes without notice. 02.17)
Self-levelling range
± 2°
Accuracy
± 0.15 mm / m
Operating range (depending on room illumination)
20 m
Working range with hand receiver depends on how
the technology affects the difference in brightness)
30 m
Laser w avelength linelaser
635 nm
Laser class
2 / < 1 mW
Pow er supply
Li-Ion rechargeable
battery pack
7.4 V / 2600 mA
Pow er pack operation
Operating time
w ith 3 laser levels
w ith 2 laser levels
w ith 1 laser level
approx. 7 hours
approx. 10 hours
approx. 15 hours
Operating temperature
0°C ... +50°C
Storage temperature
-10°C ... +70°C
Dimensions (W x H x D)
180 x 145 x 125 mm
Weight (including battery pack)
1.51 kg
Checking the vertical line
Position the device about 5 m from a wall. Fix a plumb bob with a line of 2.5 m
length on the w all, making sure that the bob can sw ing freely. Sw itch on the
device and align the vertical laser to the plumb line. The precision is within the
specified tolerance if the deviation bet w een the laser line and the plumb line
is not greater than ± 0.75 mm.
Checking the horizontal line
Position the device about 5 m from a w all and
sw itch on the cross laser. M ark point B on the
w all. Turn the laser cross approx. 2.5 m to the
right and mark point C. Check w hether the
horizontal line from point C is level w ith point B
to w ithin ± 0.75 mm. Repeat the process by turning the laser to the left.
Regularly check the calibration before use, after transport and after
extended periods of storage.
!
