9
CONTROLS & EMISSIONS
CONTROLS
1
System Power Switch
with Red LED
2
Laser Mode Switch
with Green LED
1st depression = On Steady Mode
2nd depression = Blink Mode
3rd depression = Off
3
Power Cable to Vehicle 12
4
Laser Control Cable
LASER SPECIFICATIONS
Laser Source
YAG
Wavelength
532nm
7mm Aperture Power at 20cm Distance
< 5mW
Diameter
25mm
Divergence
< 0.1mrad
Emission
CW or 2Hz
Laser Class
IIIa
WARNING!
Do not open or tamper with purge valve, front, rear or top covers. Laser is filled with dry nitrogen
to prevent moisture from damaging optics. No user access to interior components! Removal of covers
will violate IEC/OSHA Regulations and Factory Warranty.
Warnin
Do
e
cov
tr
fro
c
Rem
l of covers will violate IEC/OSHA Regulations and Factory Warranty
Laser Aperture
White wire
Black wire
ground
Controls:
1). System Power Switch
with corresponding LED (RED)
2). Laser Mode Switch
with corresponding Indicator (Green)
1st depression = On Steady mode
2nd depression = Blink Mode
3rd depression = Off
3). Power Cable to Vehicle 12vdc
4). Laser Control Cable
Controls & Emissions
l Cable
Connects Here
Laser Source YAG
ert
Do not open or tamper with purge valve, front, rear or top
covers. Laser is filled with dry nitrogen to prevent moisture
from damaging optics. No user Access to interior components!
Removal of covers will violate IEC/OSHA Regulations and Factory Warranty
Laser Aperture
White wire +12Vdc
Black wire Battery
ground
Controls:
1). System Power Switch
with corresponding LED (RED)
2). Laser Mode Switch
with corresponding Indicator (Green)
1st depression = On Steady mode
2nd depression = Blink Mode
3rd depression = O
3). Power Cable to Vehicle 12vdc
4). Laser Control Cable
rols & Emissions
Control Cable
Connects Here
G
nm
.
or 2Hz
Warning!
Do not open or tamper with purge valve, front, rear or top
covers. Laser is filled with dry nitrogen to prevent moisture
from damaging optics. No user Access to interior components!
Removal of covers will violate IEC/OSHA Regulations and Factory Warranty
W
Bl
g
Controls:
1). System Power Switch
with corresponding LED (RED)
2). Laser Mode Switch
with corresponding Indicator (Green)
1st depression = On Steady mode
2nd depression = Blink Mode
3rd depression = Off
3). Power Cable to Vehicle 12vdc
4). Laser Control Cable
Controls & Emissions
Laser Source YAG
Wavelength 532nm
7mm Aperture Power at 20cm distance <5mW
Diameter 25mm
Divergence < 0.1mrad
Emission CW or 2Hz
Laser Class EU 3B
Laser Class USA IIIa
White Wire +12
Black Wire Battery Ground
Control Cable
Connects Here
W
m
Laser Aperture
4
3
2
1
VDC
12vdc
Vdc
tery
VDC
