STOP ENGINE CONNECTIONS
STARTING KEY/FUEL PUMP BLOCK
Identify the
the
fuel pump coil or
electronic ignition. Cut this
wire. Connect J1 wire to the side where t e command arrive
h
s
(ignition switch side) and connect J2 wire to the fuel
pump
side.
/electronic ignition
Weld and isolate the connections carefully.
NOTE: don’t cut a xed positive for this connection (J2 is a
secondary positive starting key).
BM1
ELECTRONIC
IGNITION
FUEL
PUMP
O
J1
J2
STARTING KEY BLOCK
BM2
J11
J12
J10
(OPTIONAL)
Identify the starting key wire. Cut this wire. Connect J11 to the
starting key side (ignition switch side) and connect J12 to the
starter motor side.
Weld and isolate the connections carefully.
J10 (Optional): connect to ground.
DO NOT INVERT THE CONNECTIONS
OF J1 AND J 2 WIRE.
COULD
1
1
IT
DAMAGE THE IMMOBILIZER!
STARTER
MOTOR
DO NOT INVERT THE CONNECTIONS OF
J1 AND J2 WIRE. COULD DAMAGE THE
IT
IMMOBILIZER!
UK
30
30
87
87
87a
87a
4
LASERLINE immobilizer ensures a very reliable protection of the vehicle automatically
disabling two of the vehicle electrical circuits (starter solenoid, fuel pump, injection,
ignition, ...),
preventing unauthorized attempt of starting.
