![LaserLine 361 Скачать руководство пользователя страница 2](http://html2.mh-extra.com/html/laserline/361/361_fitting-instructions-manual_3761922002.webp)
361 (connections)
STOP ENGINE RELAYS
POS.
-1-
-2-
-3-
-4-
-5-
-6-
-7-
-8-
-9-
-10-
-11-
-12-
-13-
-14-
-15-
-16-
FUNCTION OF THE WIRE
Engine positive closing (CH)
Analogic button
al
Learning negative command
Starting key positive
Positive U.S. or
Status positive command ON
Alarm command U.S.
Hazzard negative command
Intermittent siren or
hornet command
Ground
WIRE COLOUR
YELLOW-BLUE
LIGHT BLUE
VIOLET
RED-WHITE
PINK
BLUE
YELLOW-BLACK
BROWN-BLUE
BLACK
Positive
RED
Negative command LED
BLACK
GROUND electronic key
Modules negative command
WHITE-BLACK
ORANGE
Buzzer negative command
Electronic socket code
Shield
Signal
Normally open 87 relay BM1
BLACK J1
BLACK J2
BLACK J11
BLACK J12
BLACK J10
Common 30 relay BM2
Common 30 relay BM1
Normally open 87 relay BM2
Normally close 87a relay BM2
2
WIRES
LED/ELECTRONIC SOCKET POSITIONING
The Electronic Socket/LED must be
in a position that is easy to access and
placed
visible from inside and outside
the car. To x the Electronic Socket/LED to the
of
dashboard, drill a hole with diameter
.
10 mm
IMMOBILIZER POSITIONING
Remember the immobilizer installed in accordance with the manufacturer's instructions;
Place the immobilizer behind the dashboard or the glove compartment or the seat. At the
end of the installation it must be correctly xed with the xings provided. Its placement
should offer maximum protection against tampering by unauthorized persons.
Do not place it in areas with excessive heat or splashes of water.
Route the cables as far as possible from sources of interferences (high voltage coil,
spark plug cables).
PRECAUTIONS FOR THE INSTALLER
!
WARNING:
This product must be installed by skilled and quali ed personnel.
The immobilizer is exclusively designed as a deterrent against possible thefts.
The manufacturer will not be held responsible for defects or malfunctions in the alarm or
car electrical system due to incorrect installation, having gone beyond the limits
indicated in the technical data or due to any modi cations of the product.
LASERLINE reserves the right at any time to make changes deemed necessary without
prior notice.
Lin
NO USED
code
ORANGE-WHITE