GARAGE FUNCTION
This function allows the vehicle to be left in attended car parks or for vehicle servicing, without
having to leave the remote controls or electronic keys*.
The procedure to activate the
GARAGE FUNCTION
is described below:
#
With the alarm disarmed, and all doors closed, turn the ignition key ON;
$
Within 5 seconds press button ‘A’ on the remote control (arm/disarm) three times. The LED on
the dashboard will turn ON each time the button “A” is pressed and at the same time, you
will hear an audible tone.
%
Programming will be confirmed by a forth audible tone and the direction indicator lights will
flash at the same time.
Once programmed all passive functions (passive arming/passive immobilisation/power supply
interruption*** and safety locking) are disabled, allowing continuous use of the vehicle without the
need for the remote controls or electronic keys*. Disconnecting and reconnecting the battery of the
vehicle, will not affect this state.
The red LED will flash in the passenger compartment every 15 seconds to confirm that the function
is ON.
To deactivate
GARAGE FUNCTION
, press button ‘A’ of the remote control (arm/disarm). The
direction indicator lights will flash once and you will hear an audible tone at the same time to
confirm that the function has been deactivated.
ADDITION
SENSOR CIRCUIT* -
This circuit is used to program the presence of an additional
sensor (e.g. hyper-frequency sensor, anti-lifting sensor, microwave sensor, etc.) for additional
protection.
VOLTAGE DROP SENSOR** -
This sensor generates an alarm when it detects that the internal
courtesy light has turned on. This type of sensor must often be excluded on cars equipped with a
timed courtesy light or coolant fan run on.
KEY
* Optional. ** Vehicle dependent. *** 211BUK only.
