DMX address calculation
For DMX mode, DMX512 address from #1 to 9# dipswitches must be set, the address is
set from 1 to 511. Each dipswitch represents a binary value.
Dipswitch
Value
Dipswitch
Value
＃
1
1
＃
6
32
＃
2
2
＃
7
64
＃
3
4
＃
8
128
＃
4
8
＃
9
256
Front Panel Figure
＃
5
16
＃
10
Set to "0"
1. Laser Aperture One
2. Sound Active Microphone
One unit has 7 channels, so each unit must be assigns 7 channels at least. We may assign 8
3. Sound Active Indicator:Blue
4. Power Indicator:Red
channels for one unit, then DMX address = 8*N + 1, N=0, 1, 2, 3 ……
Example
One loop address=1, two loop address=9, three loop address=17, four loop address=25
Loop Address Binary Dipswitches
1 1 100000000
＃
1
2 9 100100000
＃
1+#4
3 17 100010000
＃
1+#5
4 25 100110000
＃
1+#4+#5
Rear Panel Figure
The dipswitches setting for DMX address see the " DMX Address Quick Reference Chart ".
1. Power Jack
2. Cooling Fan
3. Audio Sensitivity Knob
4. DMX Signal Indicator: Green
5. Dipswitches: Function Setting
6. DMX or Linking Jack
Stand-Alone Operation (Sound Active, AUTO mode)
The mode allows a single unit to react to the beat of the music in the master mode.
1. Install the units in a suitable position (laying or appending).
2. Set dipswitch to select Sound Active or AUTO mode.
Sound Active
3. Turn on the unit power, the unit begins reset, then the unit begins working.
The change of the laser pattern is controlled by sound, that is, the rhythm of the sound
4. The unit will react to the low frequencies of music via the internal microphone. Adjust
control the effect of the changing laser pattern. Turning the sensitivity knob in the
the audio sensitivity knob on the back of the unit to make the unit more or less sensitive in
clockwise direction to increase the fixture’s sensitivity to sound, the knob in the counter
sound active.The panel has LED indicating for sound active.
clockwise direction to decrease. The laser diode will automatically turn off after 8 seconds
when the music stops.
AUTO
Auto cycles the built-in programs without being controlled externally. It has no laser
OFF
Page 6
Page 3
Function & Setting
Operation
Front/Rear Panel
1: Master: Sound/AUTO
2: Master:
N: Master: Sound/AUTO
……
POWE
POWE
POWE
1
5
6
2
3
4
