Playing a record
1) Place your record on the turntable.
2) Select the correct playing speed (33.3, 45 or 78 rpm)
(Note: this speed needs to match the speed rating of your record)
3) Turn the power on
4) Release the arm lock.
5) Engage the arm raising lever, position the needle over the record and using the arm lever, lower the
needle onto the record.
MAINTENANCE
REPLACING THE STYLUS
HINTS AND TIPS
- Keep your records clean by occasionally wiping them with an anti-static cloth
- Pick off any dust which may occasionally accumulate on the stylus.
- A very soft brush dipped in alcohol can be used to clean the stylus by wiping in from back to the front.
- When transporting your record player do not forget to replace the protective cap on the stylus and
engage the tone-arm clip.
Unlock the tone-arm
Unlock the tone-arm
Lift the front tab to
remove Stylus
Carefully remove
cables
Connect the cables for
the new Stylus
Position the stylus
correctly to insert
Position the Stylus
from the back first
Then push the front to
click into place
