Laser BLU-BD1080, Руководство пользователя

Страница: 47 / 49

BLU-BD1080
USER MANUAL
46
TROUBLESHOOTING
Symptom Possible Cause Solution
No colour Video system is not
supported by the TV Set the correct TV System in the Setup Menu.
Saturation set too low Check the saturation setting on TV.
Loose or damaged
component video cables If using component output, check that the three
cables are all properly plugged in and not
damaged. Make sure the colour of the plugs
match the jacks on both ends.
Incorrect video output port If using composite video output, check that the
cable is not incorrectly plugged into a
component video jack.
Incorrect
colour
Incorrect colour space
setting If using HDMI for video output, check the colour
space setting on the TV and player.
Incorrect component video
cable connection If using component video output, check the three
component video cables to make sure the signals
match on both ends
Picture rolling
or
split picture Video system is not
supported by the TV Set the correct TV System in the Setup Menu.
“No Disc” or
“Unknown No disc or incompatible
disc loaded in player Eject disc and check. Verify player functionality
by inserting a known working disc.
Disc” Error Dirty disc recording surface Eject the disc and clean any dirt or fingerprints.
Disc not properly loaded Eject disc and make sure the label side is facing
up and the record side is facing down.
Condensation on the Laser
pick-up head Turn on the player, eject the disc and leave the
player on for about an hour.
Remote
control
failure Remote control is out of
range Use the remote control within the effective
range.
Point Remote at IR receiver on front Panel.
Low battery Replace the batteries.
Temporary
function Scratched or damaged disc
is used Replace the disc.
failure
Some functions are not
available during playback Stop playback completely, then try again.
Interference from other
devices Identify interference by turning off other
devices, and then relocate or replace the
offending device.
Some Setup
Menu items
are greyed
out Some setup options cannot
be changed while a disc is
playing. Some setup
options may be mutually
exclusive with other setup
options. Fully stop playback by pressing the stop button
twice, eject the disc and try the Setup Menu
again.