AO-BTHD
USER MANUAL
9
RE-CONNECTING TO A BLUETOOTH DEVICE
•
Automatic connecting: Every time the AO-BTHD is switched on, it will connect to last
connected device automatically
•
Manually connecting to the last connected HFP device: When the AO-BTHD is in
standby mode and doesn’t connect to any HFP devices, press the MFB button twice,
it will connect to the last connected device automatically
Note: Before connecting to a Bluetooth device, please enable the device’s Bluetooth
function.
MAKING PHONE CALLS WITH THE AO-BTHD
(The headset must be connected and paired with a Bluetooth compatible mobile phone)
Function
Status of AO-BTHD
Operation
Voice dial
Standby mode
Press and hold the MFB button for 1 second, release
it when you hear a tone
Redial last
number
Standby mode
Press the MFB button twice quickly
Volume up
Conversation mode press the
+
key
Volume down
Conversation mode press the
-
key
Answer call
Ringing
press the MFB button
Reject call
Ringing
Press and hold the MFB button for 1 second. Release
the MFB button when you hear a tone.
Note:
•
The AO-BTHD can be switched between music or phone call, so you wont miss
incoming calls whilst listening to music
•
Not all the mobile phones support all the functions listed above. Please refer to
the instruction manual of your mobile phone.
•
Some functions and indication tones may vary with different mobile phones.
•
When the volume is adjusted to max or min, you will hear an indication tone.
•
When accepting or making calls on some mobile phones, the default setting may
be to communicate via the phone (speaker and microphone) instead of on the
headset. If the is the case, simply switch over to the headset within the phones
