Laser Technology LTI 20/20 TruSpeed Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 46

background image

Page 24 - Laser Technology, Inc. LTI 20/20 TruSpeed Metric User’s Manual 3rd Edition

Copyright (c)[2013] Laser Technology, Inc. All rights reserved. Unauthorized duplication, in whole or in part, is strictly prohibited

In this mode, the TruSpeed will continue to attempt to lock onto the target as

long as the TRIGGER remains pressed. The unit will also continually try to acquire

a speed measurement in this mode. Consequently, it is very important that the

aiming point on the target remain constant for the entire measurement time. If

you move the instrument off the aiming point, the last good measurement will be

displayed in the scope for 1 second and the repeating single low-pitched beep will

sound indicating the instrument is trying to re-establish target lock.

After you release the TRIGGER the

instrument will display the last good

speed measurement and capture

distance.The LCD will look similar

to Figure #21.

Effects of a Strong Light Source

The LTI 20/20 TruSpeed contains advanced circuitry and algorithms

that allow the instrument to determine if a laser jammer is being used.

The JAM tone

indicates that the instrument is being flooded

by a light source. There are two possible situations:

•

You are targeting a strong light source such as sunlight or

xenon headlights.

-or-

•

A targeted vehicle is employing a laser jammer.

Regardless of the level of interference, you will never get an erroneous speed

reading.

•

At a low level of interference, you will hear the jam tone and a speed

may be captured or an E03 error code may be displayed.

•

At a high level of interference, you will hear the jam tone and an E07

error code will be displayed.

Optional Jam Detect Feature

The LTI 20/20 TruSpeed contains advanced circuitry and algorithms that allow the

instrument to determine if a laser jammer is being used. The JAM tone

indicates that the instrument is being flooded by a light source. There are two

possible situations:



Your TruSpeed may not include the Optional Jam Detect feature.

It is a factory-defined option that is set when the instrument is shipped.

The TruSpeed includes hardware-based laser jammer detection. Jam

Detect is an integrated software feature that provides, (1) Jammer Defeat,

(2) Jammer Detection, and then (3) emits the jam tone to alert the user.

Figure #21

«
...
24
25
26
27
28
...
»

Содержание LTI 20/20 TruSpeed















































Отзывы:

Нет отзывов

Похожие инструкции для LTI 20/20 TruSpeed

Бренд: ABB Страницы: 20

Бренд: Utilitech Страницы: 2

Бренд: Lambrecht Страницы: 5

Бренд: Keithley Страницы: 25

Бренд: Raytech Страницы: 18

Бренд: janitza Страницы: 48

Бренд: Divertug Страницы: 47

CoolPoint CP12-V8

Бренд: UFM Страницы: 14

Nitro-Save NS16

Бренд: TDI Страницы: 4

Бренд: Environmental Express Страницы: 40

Бренд: Polimaster Страницы: 24

Бренд: Ecodhome Страницы: 12

Бренд: Ocean Reef Страницы: 24

Бренд: MEWOI Страницы: 21

Бренд: General Страницы: 12

my mp3 grand piano

Бренд: ItsImagical Страницы: 5

Бренд: R&S Страницы: 35

WattNode Plus WNC-3D-240-FT10

Бренд: CCS Страницы: 43

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды