3
Instruction Manual
Hydropneumatic Trolley Jack“HN-360”
3. TECHNICAL FEATURES.
MODEL “HN-360”
CAPACITY
60 / 30 / 18 tonne
HEIGHT
180 mm.
PISTON TOTAL STROKE
237 mm.
FEEDING MAXIMUM PRESSURE
8 / 12
DIMENSIONS
1395 x 350 x 980
WEIGHT
70 Kg.
START UP
The hydro pneumatic trolley is properly packed on a wooden pallet.
In order to start up, unpack the equipment and read the instruction manual.
The manual must be accessible to the operators, familiarise with the equipment and your co-workers, do not lose it.
1-
Release the lever (2) and the cylinder (5).
2-
Introduce the lever in the hole provided to it, located in the chassis (7), and put the fastening socket with the pin, checking that
they are tighten, using if is necessary any drop off auto blocking.
3-
Connect the two tubes of air, between the lever and the chassis using the connections provided in the lever in accordance with
the tubes which have the same colour.
Connection with the installation of compressed air.
The compressed air goes into the circuit by means of the rapid coupler located in the superior right side of the lever; it is necessary to
have a connection tube with a rapid coupler compatible with the hydro pneumatic trolley’s junction.
Check that the hoses have an interior diameter of 8 mm and that there is no throttle.
Never introduce in the compressed air circuit, hydraulic oil, vaseline oil, brake liquid, petrol or other liquids.
Cut in the installation of air with a dehumidification machine.
If you wish to lubricate the circuit, use only:
AGIP OSO 100, MOBIL DTE 27, ESSO TERESSO 100
ENVIROMENTAL CONDITIONS
The hydro pneumatic trolley runs in normal environmental conditions, being the minimum and maximum temperatures that supported
respectively: -20ºC and +50ºC.
4. START UP.
1-
Enforce the security rules of this manual.
2-
Support the hydro pneumatic trolley on a stable and safety surface.
3-
To elevate the load, turn to the right (respect the operator) the command (1).
4-
Block the load once it is elevated.
5-
To descend the load, turn the command (1) to the left (respect the operator’s position)
6-
The chief operator must be responsible for providing their personnel, the needed information and the necessary training about
the pumping and translation forces.
7-
In case of distributor’s break during the use, close the security faucet, located in the command (1) between the rapid coupler of
air connection, and the proper distributor.
IMPROPER USE
This Jack has been designed and engineered in order to elevate means of transport, any other use of the jack like
persons elevation or displacement, is considered improper, as well as any other use not contemplated in this
manual, and which does not respect the security rules.
Содержание HN-360
Страница 5: ...5 Instruction Manual Hydropneumatic Trolley Jack HN 360 7 DECLARATION OF CONFORMITY ...
Страница 6: ...953 935 KITPROL 965 975 1152 944 1192 970 ...
Страница 10: ...33 301 508 795 1143 118 1142 1049 1163 1308 1164 1309 301 1305 9 6 5 301 1162 1141 301 ...
Страница 11: ...1307 541 2056 2032 1312 1295 1306 1083 376 304 1313 1296 302 390 1296 9 7 0 9 4 4 390 ...