L'Artistico A10 Series, Инструкция по установке и эксплуатации

Страница: 22 / 152

== ENG PELLET STOVES
(Rev. 15/10/2013)
Dear Customer,
Thank you for choosing one product from our range and we hope you will be fully satisfied.
I describe you hereunder the most outstanding features of our stove:
1. All stoves belonging to the A6 A8 and A10 series (product family identification code) have been build with high
gauge steel (up to 3 and 4 mm for the combustion chamber) of the best quality for the inner part of the combustion
chamber.
2. For the electric and electronic components the best suppliers on the European market have been selected. The
main board, actually the heart the stove, has been developed by the market leader with over 1.000.000 parts on the
market.
3. Other components like smoke exhaust motors, pellet loading system and hot air fans have been selected with the
same concept: only the best available on the market. One example. For the pre-heater we could use a cheaper
component like al other competitors but we decided to install a double jacket. This gives us the possibility to install
the pre-heater right there in the fire place, where the pellet is. Why? To get a fast and safe starting of the stove!
4. Our philosophy is identifying us since tens of years and with a step by step check allow as gaining an outstanding
and unique quality level.
5. On the top of all other checks, electric and for single components, we have added the “FINAL FIRE CONTROL”, a
check we already run since over 10 years for all or gas stoves. At the end of the production we do connect and fire all
stoves and thanks to a special electronic control, do simulate all the typical conditions like in your everyday use. In
this way we make 100% sure each single stove is working 100%.
Our exclusive overpressure valve is your guarantee for safety even when using not approved pellet quality or the
chimney doesn’t work properly and a smoke build up in the fire chamber happens
Quality comes from good project, experience and care in production and last but not least, the will of producing a
stove developed for lasting. All these know how is the result of 3 generations of entrepreneurs. For us it is a point of
honor being able to say we, since 3 generations do supply 3 generations of customers.