10. Maintenance and Cleaning
Please keep the inner cavity of the sensor and probe clean,
otherwise it will affect the measurement accuracy.
1.
Surface cleaning: Wipe surface dirty with a clean soft
cloth or cotton swab with a little medical alcohol or water.
2.
Sensor and inner cavity cleaning: use a clean soft cloth
or cotton swab to stick a little medical alcohol gently wipe the inner
cavity of the probe or the top of the sensor ,use until the alcohol is
completely evaporated.
Please read the instructions carefully before use.
●
Do not immerse the thermometer in any liquid, and do
not leave it in extreme high or low temperature environments for a
long time.
●
Avoid dropping or other hard impacts.
●
The thermometer should not be used in the sun or water.
●
Do not use in strong electromagnetic interference
environment.
●
Keep the thermometer out of the reach of children.
●
It is recommended to practice several times to become
familiar with the measuring method, and try not to change the
product factory settings.
●
Measurement results are not a substitute for physician
diagnosis.
●
No special maintenance is required during use, please
contact the seller or manufacturer if there is any malfunction
appears.
XLE-MD-TM-IR-R1
Larson Electronics, LLC
P
:
(800) 369-6671 www.larsonelectronics.com
11