SPG366A-600 Series
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
5 of 6
LOWERING THE MAST
Lower the mast to its lowest position.
1.
Open the compartment door and ensure the air
compressor switch is turned
OFF
.
Please verify the
compressor switch is turned off or the mast will not
lower.
2.
Flip the mast switch to MAST DOWN. When fully
down, put the switch into the middle neutral
position.
3.
All power may be turned off.
TOUNGUE REMOVAL
If necessary, the tongue can be removed for secure,
long term installations.
NOTE: When removing the
tongue, make sure to disconnect the trailer light
wire.
1.
Once the trailer has been fully deployed with
outriggers extended, raise the trailer hitch
outrigger
and fold it up.
2.
Remove the two bolts holding the tongue in
place
including any clamps holding the tow
cable.
3.
Slide the tongue out and place it in a secure
area
to prevent unauthorized movement of
the trailer.
TRANSPORTING
Prepare the trailer for transportation.
4.
Replace the tongue
,
tow cables
, and trailer
light wire
(If
Removed)
.
Ensure the tongue
is secured in
position before attempting to
tow the trailer.
5.
Extend the tongue jack to hold the trailer in
position.
6.
Disengage the outriggers and return all
pieces to their original positions.
7.
The unit is now ready for transport.
