Class I, Div. I Explosion Proof Horn - Industrial Siren
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
3
of
3
allow the battery to charge in full direct sunlight for
at least 5 hours for the battery to reach its full
capacity.
It is recommended to occasionally inspect the unit
for any defects.
TROUBLESHOOTING
If for any reason the LED beacon does not power
on:
Batteries not fully charged:
Make sure the
fixture is placed in an area where the solar
panel gets the maximum amount of full, direct
sunlight every day. If the solar panel does not
receive enough sunlight during the day (e.g.
due to cloudy or overcast weather conditions),
it will be recharged on the next sunny day and
resume operation.
Other light sources:
(For units equipped with
a day/night sensor.) If your solar light is
located too close to street lights, porch lights
or other lights, the solar panel may turn off the
fixture. Relocate the solar panel or eliminate
those other light sources.
Not enough direct sunlight:
Ensure that the
fixtures are not installed in a shady area, for
example, in the shadow of a tree or a house.
If necessary, move the fixtures to an area that
gets full direct sunlight.
Switch is in the OFF position:
(For units
equipped with a power switch.) Cycle power
button to STROBE Mode 1 in a dark room.
The light(s) should come on when the switch
is in the on position if the unit is fully charged.
SPECIFICATIONS
Operation:
Automatic- Manual On/Off Rocker Switch
Panel Dimensions:
W-11 3/8" L-15 3/4" D-1"
Beacon Dimensions:
H-5 3/4" Diam-3.5" 3.75"
Footprint
Solar Panel Watts:
30
LED Watts:
3.6 @.244 amps
Battery:
(2) 8aH sealed lead acid batteries
Charging Time:
5 Hours
Runtime:
15 hrs
Mounting:
Surface or Post
Should further information not covered by these
instructions be required, please contact Larson
Electronics at 1-800-369-6671 for further
assistance.
Please visit LarsonElectronics.com for
Warranty
and
Return
information.
