![background image](http://html1.mh-extra.com/html/larson-electronics/nvr-ndaa-poe-4ch/nvr-ndaa-poe-4ch_instruction-manual_3722672101.webp)
101
3.
Click
Apply
to save the settings.
NOTE!
After port mapping is completed, you can access the Web client
of your NVR by entering the following information in the address
bar of your web browser: router's WAN port IP address: external
HTTP port. For example, if 10.2.2.10 is the IP address and 82 is
Platform Configuration
SNMP
Use SNMP to connect to a platform and obtain system time.
1.
Click
Network > Platform.
Select
Enable SNMP
.
2.
Select an SNMP type.
Содержание NVR-NDAA-POE-4CH
Страница 18: ...18 2 Change the password into a strong one then click OK 3 Set the unlock pattern...
Страница 94: ...94 3 Click Backup to export the counting statistics to a storage device...
Страница 146: ...146 5 Configuration Click Setup on the top and then click the menus on the left to configure parameters...