Larson Electronics LLC www.LarsonElectronics.com [email protected]
9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364
Using tis light product for other than a lighting device is not recommended. Larson Electronics
specifically disclaims liability for other than intended use.
Remove the light by pulling up and out of the charger. Insert the light into the charger with a
downward motion relative to the charging platform.
MOUNTING CHARGER PLATFORM
Mounting the charger platform requires two #8 screws (not provided). Use the supplied 12VDC fused
auto adapter plug for temporary vehicle installations. For permanent wiring, the installation must be
fused using a 3 amp in-line fuse. The DC input terminal that connects to the base of the charger
platform is center-positive. Installation should be performed by a professional installer.
OPERATION
Two body switches control all functions of the 9850. This light has a Flashlight, Floodlight, and Dual-
Light function. It also has a strobe function. The strobe flashes at approximately 2 flashes per second.
Light Mode
Activate
Deactivate
Momentary Flashlight
Lightly press & hold SWITCH 1
(no click)
Release pressure on SWITCH 1
Constant Flashlight
Press & Click SWITCH 1
Press & Click SWITCH 1
Constant Half-Power Flashlight
Press & Click SWITCH 2 - 3x
Lightly Press SWITCH 1
Constant Floodlight
Press & Click SWITCH 2
Lightly Press SWITCH 1
Constant Half-Power Floodlight
Press & Click SWITCH 2 – 2x
Lightly Press SWITCH 1
Dual-Light – Flashlight & Half-
Power Floodlight
Press & Click SWITCH 1 & then
SWITCH 2
Press & Click SWITCH 1
ADDITIONAL FEATURES
Chemical Resistance – The housing is resistant to most automotive and industrial chemicals. For
example: Potassium hydroxide, hydrochloric acid, sulfuric acid, isopropyl alcohol, Freon, gasoline,
kerosene, diesel fuel, antifreeze, hydraulic fluid and others. Avoid prolonged exposure and clean
immediately.
Moisture Resistance – The light is not affected by fog, mist or intermittent spray.
EMI – The charging platform and light are electromagnetically compatible with FCC regulations CFR-47,
Part 15, Sub-Part B and Class A.
Battery – This light is powered by a Nickel Metal Hydride (NiMH) battery pack and is earth friendly so it
can be disposed of in municipal waste without harm to the environment. (Excluding California)
