![background image](http://html.mh-extra.com/html/larson-electronics/gl-4600-f-m-12i/gl-4600-f-m-12i_instruction-manual_3729200003.webp)
» This light is not approved for use inside a vehicle or
enclosure and power should be disconnected prior to
placing the light in such circumstance
» This light may be damaged if operated in icing
conditions
» This light may only be dismantled by an authorized
Larson Electronics representative.
» Any violation of the above referenced misuses
will be considered grounds for warranty refusal
IMPORTANT SAFETY INFORMATION
This symbol is to alert you to important operating
or servicing instructions that appear in your
instructions.
Always
follow
basic
safety
precautions when using this product to reduce the
risk of injury, fire or electric shock.
This light is for off road and utility use only. It
is not designed for road use as a driving light.
The GL-4600 complies with Part. 15.105 of the
FCC Rules. This equipment has been tested and
found to comply with the limits for a Class B
digital device. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause
harmful
interference
to
radio
communications.
However,
there
is
no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
FCC RULE Part. 15.21 - Changes or
modifications made by the user not expressly
approved
by
Larson
Electronics,
LLC.
for
compliance could void the user
’s authority to
operate the equipment.
PARTS / ACCESSORIES
Contact manufacturer for GL-4600 parts and
accessories.
Should further information not covered by these
instructions be required, please contact Larson
Electronics
at
1-800-369-6671
or
[email protected] for further assistance.
Please visit
Warranty
and
Return
information.
LARSON ELECTRONICS, LLC
9419 E US-HWY 175
KEMP, TX 75143
800.369.6671 | 903.498.3363