5
g.
Log into the camera again. A
Live View
display will appear.
h.
In live view, select Hardware. Then, select Mount Type.
PTZ button
PTZ control panel
PTZ Preset - Path select tabs
Step 8. Setup Storage Management
In the Storage Management menu, you can prepare a storage device, such as an internal micro SD card or
a NAS (See the IP Camera Software User Manual ) for use. These devices usually must be formatted
before they can store data from the camera. You can also set the percentages of Pictures (Captures) and
Video recordings across the storage device.
To open the Storage Management menu, go to
Setup
tab
| Storage | Storage Management
In the example above, a 16 GB MicroSD card was installed in the camera.
1.
NOTE
If the
Status
of the HDD is
, the HDD is not recognized. Check the settings on the NAS menu. See
the document
IP Camera Software User Manual
provided on the software and
documentation.
2.
In the HDD Device List, if the
Status
external storage device (HDD) you added shows an
Uninitialized
status:
a.
Click the
Format
button to format the HDD. Format performs a full format of the HDD (erases
all data from the disk).
b.
In the
Message from webpage
pop-up window, click OK to continue.
c.
Wait until the format process completes before continuing. When formatting completes
successfully, the HDD status will change to
Normal
.
3.
Edit the percentages of the HDD allocated for
Picture
and
Record
data as needed.
4.
Click
Save
.
Step 9. Setup PTZ video streams
1.
In the
Live View
EXPCMR-IP-POE-DPTZ
www.larsonelectronics.com