47
to the latest version. If enabled, both the camera and the boot program are upgraded, and
the operating system of the following new versions can be booted properly and the camera
can be upgraded conveniently.
Ensure that the power supply is normal during upgrade. The device will restart after the
upgrade is completed.
Restarting the System
1.
Click
Setup
>
System
>
Maintenance
.
2.
Under
Device Restart
, click
Restart
. The device will restart after you confirm the operation.
CAUTION:
Perform this operation with caution because restarting the system interrupts the
ongoing service.
Importing and Exporting System Configuration File
Export the current configurations of the camera and save them to the PC or an external storage
medium. You can also quickly restore configurations by importing backup configurations stored on the
PC or an external storage medium back to the camera.
CAUTION:
After you perform the Default operation, all settings are restored to factory defaults, except
the following: login password of the system administrator, network settings, and system
time.
Make sure you import the correct configuration file for your camera. Otherwise, unexpected
results may occur.
The camera will restart when the configuration file is imported successfully.
1.
Click
Setup
>
System
>
Maintenance
.
2.
To import configurations that you have backed up, click
Browse
next to the
Import
button and
select the configurations you want to import, and then click
Import
. The result will be displayed.
3.
To export configurations, click
Browse
next to the
Export
button, select the destination folder,
and then click
Export
.
4.
To restore default configurations, click
Default
and then confirm the operation. The device will
restart and restore the default configurations.
Содержание EXPCMR-CER-IP-POE-4MP-IR-V3
Страница 5: ...INTENTIONALLY LEFT BLANK PAGE BREAK PAGE BREAK...
Страница 32: ...25 The following shows an example time OSD...
Страница 60: ...53 Acronym Description WDR Wide Dynamic Range...