Larson Electronics, LLC
Phone: 877-348-9680
Fax: (903) 498-3364
3
of
3
EPL-SL-4-50X-50LED-RT-MBC-EPP
To replace driver,
disconnect power running to fixture. Dismount fixture and remove the back
cover. Disconnect bad driver and remove the single screw holding it in place. Place new driver
and replace screw. Connect power cord and route wires as needed. Replace back cover plate.
USE AND CARE
Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.
Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of
children when not in use. Inspect for good working condition prior to storage and before re-use.
REPLACEMENT PARTS
The
EPL-SL-4-50X-50LED-RT-MBC-EPP
is designed to provide years of reliable performance. Should the need for
replacement parts arise, please contact Larson Electronics.
1.
Perform visual, mechanical and electrical inspections on a regular basis. We recommend routine
checks to be made on a yearly basis. Frequency of use and environment should determine this. It
is
recommended to follow an Electrical Preventive Maintenance Program as described in NFPA
70B:
Recommended practice for Electrical Equipment.
2.
The lens should be cleaned periodically as needed to ensure continued photometric performance.
Clean the lens with a damp, non-abrasive, lint-free cloth. If not sufficient, use mild soap or a liquid
cleaner.
3.
Inspect the cooling fins on the luminaire to ensure that they are free of any obstructions or
contamination (i.e. excessive dust build-up). Clean with a non-abrasive cloth if needed.
4.
Do not operate if the lens is cracked or damaged. All fasteners should be properly seated.
