Larson Electronics LLC www.LarsonElectronics.com [email protected]
9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364
SPECIFICATIONS
DIMENSIONS
Pneumatic Motor: 1.71 hp
Height: 21” 53.34 cm
RPM: 3000
Width: 14” 35.65 cm
CFM: 2063
Length: 17” 43.18 cm
Duct Adapter: 12” 30.48
Weight: 28 lbs. 12.75 Kgs
CAUTION:
Severe personal injury or death COULD occur if hazard is ignored.
AIR MOTOR PRECAUTIONS
CAUTION:
The air motor is designed to be driven by compressed air. Under no circumstances should
the air motor be driven by any other gasses. The air motor must not be driven by fluids, particles, solids
or any substance mixed with air, particularly combustible substances likely to cause explosion.
CAUTION:
DO NOT USE KEROSENE OR OTHER COMBUSTIBLE SOLVENTS.
CAUTION:
Foreign material exiting the air motor can be hazardous. Solid or liquid material exiting the
unit can cause eye or skin damage. Keep away from air stream.
CAUTION:
Keep face away from exhaust port. Eye protection is required.
CAUTION:
Water, vapor, oil-based contaminates or other liquids must be filtered out.
CAUTION:
Do not drive the air motor in excess of the recommended operating maximums below.
Ambient temperature should not exceed 121°C (250°F).
INTERNAL OPERATING MAXIMUMS
MOTOR MAXIMUM
MAXIMUM
MAXIMUM
MAXIMUM AIR
SIZE
RPM
PRESSURE (psig)
TORQUE in lb.-inch
CONSUMPTION in CFM
V4
3000
100
36.29
38
CAUTION:
Do not allow the air motor to “run free” at high speeds without a load.
Excessive internal heat buildup will result in loss of internal clearance and rapid motor damage.
CFM RATINGS
Free Air 2063 cfm
25’ 1-90deg Bend 1497 cfm.
15’ Straight Duct 1753 cfm
25’ 2-90deg Bend 1422 cfm
15’ 1-90deg Bend 1616 cfm
100’ Straight Blowing 1243 cfm
25’ Straight Duct 1619 cfm
CAUTION:
Always disconnect the unit from the air supply before servicing.
