Larson Electronics, LLC
Phone: (877) 348-9680
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
EPCS-3XPB-BRG-24V
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.
SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
OR BY PHONE AT
1-877-348-9680
FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR
WARRANTY
AND
RETURN
INFORMATION.
OPERATION
The EPCS-3XPB-BRG-24V is a durable explosion proof control station designed for hazardous locations. This Class I,
Division 1 unit is rated at 24V and features three explosion proof push buttons with 2.75A capacity each. The
configuration of the push buttons is: red (top), green (middle) and black (bottom).
Operator name plates are displayed for
accurate and proper use of the unit.
USE AND CARE
Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.
Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of children
when not in use. Inspect for good working condition prior to storage and before re-use.
Recommend following the NEC
recommendations for inspection and maintenance procedures for the hazardous area in which your unit is installed.
REPLACEMENT PARTS
The
EPCS-3XPB-BRG-24V
is designed to provide years of reliable performance. Should the need for replacement parts
arise, please contact Larson Electronics.