SoundAdvisor Model 831C
Saving, Moving, or Copying Data Files
8-5
Step 2
Highlight the desired data file.
Step 3
Select
Menu
(
//*
)
.
Step 4
Select
Create Average
from the pop-up menu.
Step 5
Highlight a different data file, and select
Menu
.
Step 6
Select
Add to Average
from the pop-up menu.
Step 7
Repeat steps 5–6 until all data files you want to average have been added.
Step 8
Close the Data File Manager and navigate to the
Overall
display to view
the average data.
Step 9
To save the averaged data file, press
Stop/Store
7
.
8.3 Saving, Moving, or Copying Data Files
In this section:
•
8.3.1 Setting a Data File Storage Location
•
8.3.2 About Data File Naming Conventions
•
8.3.3 Moving or Copying Data Files to a USB Drive
8.3.1 Setting a Data File Storage Location
Use the meter preferences to indicate where your future measurement
data files should stored. To provide a rough approximation of file size
and required storage space,
the size of a basic measurement data file is
about 42.5 KB.
In this section:
•
Saving Data to the Internal Memory
•
•
•
Saving Data to SMTP or Cloud Storage
Saving Data to the Internal Memory
On your 831C, go to
Tools
System Properties
Preferences
.
When you select Internal, data files saved manually and via auto-store
save to the meter’s 1.8 GB internal memory. Depending on the content
and frequency of your measurements, this internal memory may
quickly fill.
