Larson Davis HVM200, Справочное руководство

Страница: 20 / 77

HVM200 Reference Manual Setting Up the Measurement 3-4
About Store Raw Data
: The sup -
plied HVM200 memory card stores
individual file sizes up to 2 GB and
more than 6 hours of data with the
Store Raw Data
option enabled.
When not enabled, the card can
store approximately 8000 hours of
data.
a.
If you have the Store Raw Data option installed, select
Store
Raw Data
. For more information about the result of storing
raw data, see 3.3.1 Working with RAW Data Files
.
b.
Select an Operating Mode.
TAKE NOTE
The Wh weighting is automatically specified for all axes with the
Hand/Arm mode. For more information on operating mode options and
weighting curves, see
“Specifications” on page A-1.
FIGURE 3-1
Operation Settings
Setting the Measurement Schedule
If needed, complete this section to schedule the HVM200 to
automatically take a measurement.
Step 1.
Tap the menu icon on the HVM200 app, then tap Settings .
Step 1. Use the arrow in the bottom right to move to the Schedule tab.
Step 2. Select Enable Schedule .
Step 3. Enter options for any applicable settings, including Auto-Off , Start
Time , Start Date , End Date , Duration , and Delay Start .
TAKE NOTE
1. If a manual measurement runs
into the start time of a scheduled
measurement, the scheduled measurement
will not occur.
2. Auto-Off is the amount of time the
HVM200 will remain on and inactive. If a
measurement begins, the time to Auto-Off
resets.
3. When Run Duration is set to 00:00:00, the
HVM200 runs until manually stopped. If Run
Duration is set to any other time, the
HVM200 stops after acquiring data for the
selected amount of time.
Settings Menu
Tap to jump to any of
the settings options
at anytime.