Larson Davis 820 Скачать руководство пользователя страница 114

Страница: 114 / 193

10-2

Normal Printout Parameters

Model 820 Technical Reference Manual

options, press

and the following screen will

appear:

There are several options here which include:

[HPJet, HPLzr, ASCII, Epson, IBM]

Step 3

You can change the printer selection by pressing the

key and then

to the printer you will use,

and press

Step 4

Press the

key to the next display, item 89 (dupli-

cated here as item 177), the beginning of the param-
eters that manage printouts:

Items 89-113 allow you to select
the reports which are to be printed
and how the output data are to be
configured.

Items 89-113 are copied sequen-
tially into items 177-201 for print-
ing tailored reports, and may be
edited directly for one printing,
and then they will revert to settings
entered in parameters 89-113.

Step 5

Scroll through these parameters with the

key and

make your selections. Press

to access the

appropriate choice and press

For a complete list of Print
Options, see Chapter 8, page 21.

Содержание 820


































































































































































































Результаты поиска

Содержание 820

Отзывы:

Larson Davis 820, Техническое справочное руководство, Страница: 114 / 193

Результаты поиска

Содержание 820

Отзывы: