Larsen & Toubro Star 55 Скачать руководство пользователя страница 117

Страница: 117 / 168

Star 55

Sterilization

ECG:

Clean as detailed above.

Wrap the connector lead in a polythene bag to prevent moisture penetration.

c. Loosely coil the cable to avoid any kinks.
d. Wrap cable in the recommended way for ethylene oxide sterilization.

SpO

, CO

, IBP and Temp:

Refer relevant accessory instruction leaflet provided along with the accessories for
any specific sterilizing procedures.

NIBP :

3A)

Isolate equipment from mains supply before cleaning. Clean the case and front

panel with a soft cloth lightly moistened with warm soap water. Use only mild

soaps or detergents. Allow the machine to dry thoroughly before use. Do not

use chemicals or abrasive cleaning agents.

4A)

Inspect the power cord for any signs of damage to cable or connectors. If

damaged, replace with a L&T replacement part. Do not attempt to repair.

5A)

Isolate monitor from the mains supply. Switch ON the monitor, and observe

the green LED. If green LED is ON, the battery status is acceptable and no

further action is required.

If the green LED is flashing with LOW BATTERY indication, connect monitor

to mains supply. Leave the unit for charging. If low battery indication still remains

on the screen, refer the monitor to service personnel for battery replacement.

WARNING

Do not steam autoclave the hose and cuff of NIBP. Use ethylene oxide gas only for

sterilization.

Caution

Batteries will be permanently damaged if left discharged.

6.3

Содержание Star 55









































































































































































Результаты поиска

Содержание Star 55

Отзывы:

Бренды по названию

Популярные бренды

Larsen & Toubro Star 55, Руководство по эксплуатации

Результаты поиска

Содержание Star 55

Отзывы:

Бренды по названию

Популярные бренды