Lars Thrane LT-300, Руководство пользователя и инструкция по установке

Страница: 27 / 47

LT-300 User & Installation Manual Connecting
Lars Thrane A/S www.thrane.eu 19 of 39
Connecting
This section provides relevant information for connecting the LT-300 GNSS Receiver to NMEA 0183, NMEA
2000, power, and the LT-Service Tool.
Connector and cable definition
The LT-300 GNSS Receiver has an 8-pin female connector, which is supporting simultaneously data on NMEA
0183 and NMEA 2000. The placement of the LT-300 GNSS connector is illustrated in Figure 28. A detailed
connector pin out with pin numbering is illustrated in Figure 29.
The LT-300 GNSS connector has a proprietary pin out and therefore a communication cable is always
included in-the-box, see Unpacking (in-the-box) on page 5. The communication cable is available in two
lengths: 10 or 30 meters. The LT-300 GNSS Receiver is delivered including a 10 meter cable (simple-cut). The
communication cable, wire color and designation, is illustrated in Table 4.
NOTE: To avoid any misinterpretation, the transmit (Tx) and receive (Rx) directions are illustrated in
Figure 30, relative to the LT-300 GNSS Receiver.
F
IGURE
29: LT-300 GNSS
CONNECTOR PIN NUMBERING
F
IGURE
28: LT-300 GNSS R
ECEIVER
(
BOTTOM VIEW
). 8-
PIN FEMALE
CONNECTOR USED FOR CONNECTING THE
LT-300 GNSS R
ECEIVER TO
NMEA
0183, NMEA 2000,
AND POWER
.
LT-300 GNSS Interconnect Details
Pin No. Wire Color Wire Designation
1 Brown TxD-
2 Yellow TxD+
3 Black GND
4 White CAN_H
5 Blue CAN_L
6 Orange RxD+
7 Green RxD-
8 Red Vsupply
T
ABLE
4: LT-300 GNSS R
ECEIVER
M
ULTI CABLE WIRE COLOR
AND DESIGNATION
.
F
IGURE
30: T
RANSMIT AND RECEIVE DIRECTIONS FOR THE
LT-300 GNSS R
ECEIVER
.